Six Shooter Single Antler Display Stand

To insure consistent accuracy try this chamber swab that accepts standard shotgun swab/mop (5/16″x27).  This handy tool allows you to consistently and properly remove excess moisture from your chamber after blow tubing or wet-wiping.  Swab is approx. 12″ long with … Read More

We have added a new feature to our product line!!  These cross sticks are still the traditional 24″, which meet the proper configuration requirements for NRA, SASS, and BPCR sanctioned competitions.  However, they have Steel Blades Bolted with Decorative Bronze Bolts into the sticks in place of the 6″ spikes.   As with all our individually hand crafted Buffalo Cross Sticks, they have the “Easy Slide Adjustment” that makes our product so unique.  No cumbersome leather cradle/barrel support and predetermined adjustment holes!!  The height can be quickly adjusted by loosening and sliding the knob up or down in the “Easy Slide Adjustment Groove”.

Cat’s Shooting Sticks are hand crafted from solid oak 1 x 2′s and a leather slide ( Included)  on each stick protects the finish of the rifle barrel and helps hold the rifle barrel in position.  The 6″ blade inserted into the bottom leaves approximately 3″ protruding, so they can be easily pushed into the ground for a solid shooting position.

New from Cats Shooting Sticks: THE BASIC QUIGLEY MODEL !  These cross sticks are as functional as our original, Buffalo Cross Sticks, however, these were developed for the QUIGLEY MATCH, WHERE PRONE SHOOTING IS NOT ALLOWED !! The construction of the BASIC QUIGLEY MODEL, allows to overcome most ground conditions.  Set these down, adjust for target, and you’re good to go. As far as stability, don’t judge before you try them. You will be astonished at how stable they are . Made with the finest oak cuts, our unique EZ SLIDE HEIGHT ADJUSTMENT FEATURE  and secured with poly hand knobs. This BASIC QUIGLEY MODEL includes the 3/8″ wide leather strips to protect your rifle barrel. The minimum height adjustment is 25″ from the ground, to a maximum of 44″, which means a full 19″ of adjustments. As always, custom lengths can be accommodated, incurring a slight additional charge. Initially, some minor assembly is required, with only a Philips screwdriver.

(NOTE: MAY NOT BE NRA legal for certain disciplines, check with your Range Officer)