Description
Oak and deer antler revolver display stand (double antler). The base is made of solid oak.
Great for displaying your favorite six-shooter , Dimensions of base are 13 x 4.
Each one is unique. Actual’s will vary.
Six-Shooter Double Deer Antler Display Stand
$45.00
Additional information
| Weight | 4 lbs |
|---|---|
| Dimensions | 14 × 4 × 10 in |
Related Products
Chamber Swab Adapter DOWN TO 8X32 TPI
Chamber swab adapter to reduce the tip to accept an 8×32 threaded adapter. Easily threads into the chamber swab to reduce the Dia. for smaller swabs for use in smaller calibers such as the .32-40… Shipping is $3.00 USPS 1st … Read More
48 inch Oak Square Top Buffalo Cross Sticks
We have added a “new look” to our product line!! These cross sticks are still the traditional 48″, which meet the proper configuration requirements for NRA, SASS, and BPCR sanctioned competition. However, they have a square top and wooden knobs, … Read More
Quigley Shooting Sticks
New from Cats Shooting Sticks: THE BASIC QUIGLEY MODEL ! These cross sticks are as functional as our original, Buffalo Cross Sticks, however, these were developed for the QUIGLEY MATCH, WHERE PRONE SHOOTING IS NOT ALLOWED !! The construction of the BASIC QUIGLEY MODEL, allows to overcome most ground conditions. Set these down, adjust for target, and you’re good to go. As far as stability, don’t judge before you try them. You will be astonished at how stable they are . Made with the finest oak cuts, our unique EZ SLIDE HEIGHT ADJUSTMENT FEATURE and secured with poly hand knobs. This BASIC QUIGLEY MODEL includes the 3/8″ wide leather strips to protect your rifle barrel. The minimum height adjustment is 25″ from the ground, to a maximum of 44″, which means a full 19″ of adjustments. As always, custom lengths can be accommodated, incurring a slight additional charge. Initially, some minor assembly is required, with only a Philips screwdriver.
(NOTE: MAY NOT BE NRA legal for certain disciplines, check with your Range Officer)
Sitting/Kneeling Oak Cross Sticks with Steel Blade Inserts
We have added a new feature to our product line!! These cross sticks are still the traditional 48″, which meet the proper configuration requirements for NRA, SASS, and BPCR sanctioned competitions. However, they have Steel Blades Bolted with Decorative Bronze Bolts into the sticks in place of the 6″ spikes. As with all our individually hand crafted Buffalo Cross Sticks, they have the “Easy Slide Adjustment” that makes our product so unique. No cumbersome leather cradle/barrel support and predetermined adjustment holes!! The height can be quickly adjusted by loosening and sliding the knob up or down in the “Easy Slide Adjustment Groove”.
Cat’s Shooting Sticks are hand crafted from solid oak 1 x 2′s and a leather slide (Included) on each stick protects the finish of the rifle barrel and helps hold the rifle barrel in position. The 6″ blade inserted into the bottom leaves approximately 3″ protruding, so they can be easily pushed into the ground for a solid shooting position.
Reviews
There are no reviews yet.